How to Build a DTF Gang Sheet That Saves You Money

You pay for the sheet, not for each design. The more transfers you fit on a sheet, the less each one costs. Here are eight ways to pack a sheet tighter and avoid paying for empty film.

1. Pick the right width

We print 22" and 46" wide sheets. If your biggest design is under 22" wide, the 22" sheet is usually the better value. Go 46" when you have large designs or a big batch.

2. Know your length steps

22" sheets come in 20, 40, 60, 80, 100, and 120" lengths. 46" sheets start at 40". You pay for the whole length step, so a layout that lands just past a step costs you the next one.

3. Auto Build is an option

If you'd rather not arrange everything by hand, our sheet builder also has an Auto Build option. You upload your designs, set the size and quantity for each, and it previews a sheet size and places everything for you. You can still move, rotate, and resize anything afterward. Placing designs yourself works just as well.

4. Check for leftover space

Whichever way you build, look at the finished layout. If the bottom of the sheet is mostly empty, drop a few copies or shrink one design and see if a shorter sheet works.

5. Keep gaps small

A quarter inch between designs is a good starting point, and the builder defaults to that. Bigger gaps waste film. Tighter gaps make cutting harder.

6. Use print-ready artwork

Transparent PNGs at about 300 DPI print best. The builder accepts PNG, JPG, SVG, PSD, AI, EPS, and PDF files. It flags low-resolution images, and fixing them before you order beats reprinting.

7. Group repeats

Put the same design in several sizes, or the designs you use all the time, on one sheet instead of several smaller ones.

8. Look it over before checkout

Check spacing, orientation, and the resolution warnings. Then save the sheet and add it to your cart.

Ready to build?

Build your own gang sheet, upload a ready-made sheet, or order by image size. Orders placed before 11 AM ship or are ready for pickup the same day.